fiberproject
QUICK CONTACT

HD-CVI/TVI/AHD Video Distribution Amplifiers

HD-CVI/TVI/AHD VIDEO DISTRIBUTION AMPLIFIERS
If you need to distribute a high definition CCTV video signal input to multiple outputs, you will want to look at our HD-CVI, HD-TVI, and AHD devices. These products provide a built-in amplifier circuit to boost the signals to the required level in order to prevent signal loss and picture degradation. The VERSITRON HD video distribution amplifiers can be installed as stand-alone devices or into a 19” rack. 

Product Specifications:

Video Input/Output

1 Volt p-p, 75Ω BNC Connector

S/R Ratio

≥70 dB

Video Bandwidth

<300MHz

Power Supply

12VDC

Power Consumption

<20W

Operating Temp

-10°C to +55°C

Humidity

≤90%

Dimensions

15.75 x 8.27 x 3.47 Inches (2U)

Available Models:

VDACVI1632

16 HD-CVI Video Inputs / 32 HD-CVI Video Outputs

VDACVI1648

16 HD-CVI Video Inputs / 48 HD-CVI Video Outputs

VDACVI1664

16 HD-CVI Video Inputs / 64 HD-CVI Video Outputs

VDATVI1632

16 HD-TVI Video Inputs / 32 HD-TVI Video Outputs

VDATVI1648

16 HD-TVI Video Inputs / 48 HD-TVI Video Outputs

VDATVI1664

16 HD-TVI Video Inputs / 64 HD-TVI Video Outputs

VDAAHD1632

16 HD-AHD Video Inputs / 32 HD-AHD Video Outputs

VDAAHD1648

16 HD-AHD Video Inputs / 48 HD-AHD Video Outputs

VDAAHD1664

16 HD-AHD Video Inputs / 64 HD-AHD Video Outputs


Our HD-CVI, HD-TVI, and AHD Video Distribution Amplifiers

If you need to distribute a high definition CCTV video signal input to multiple outputs, you will want to look at our HD-CVI, HD-TVI, and AHD devices. These products provide a built-in amplifier circuit to boost the signals to the required level in order to prevent signal loss and picture degradation. The VERSITRON HD video distribution amplifiers can be installed as stand-alone devices or into a 19” rack. The VERSITRON HD-CVI, HD-TVI, and AHD video distribution amplifiers are available with the following video channel layouts:

  • 16 video inputs and 32 video outputs
  • 16 video inputs and 48 video outputs
  • 16 video inputs and 64 video outputs

Beneficial Features of HD-CVI, HD-TVI, AHD Video Distribution Amplifiers

Here are some beneficial features of our CCTV video distribution amplifiers:

  • They are compatible with a variety of cameras including CCTV video cameras and all VersiVision products.
  • They can be operated with simple BNC connectors, and are easy and quick to install.
  • They can be used as a standalone device or a rack-mounted one connected to other devices in a video transmission system.
  • They boost AHD, TVI and CVI signals over long geographical distances with the commonly used coaxial cables. At the same time, they offer easy connectivity to fiber optic video links
  • They transmit signals in the form of visual image displays with amazing clarity, even in CCTV applications.
  • The built-in amplifier circuit helps boost transmission without signal losses or degradation.
  • They come with LED indicators for real-time tracking and alert messages.

Technical Specifications

Here are certain common specifications of our HD-CVI, HD-TVI, and AHD Video Distribution Amplifiers

  • Operating temperature range: -10°C to +55°C
  • Video Input and Output: 1 Volt p-p, 75Ω BNC Connector
  • S/R Ratio: ≥70 dB
  • Power Supply: 12VDC
  • Power Consumption: <20W
  • Humidity: ≤90%
  • Dimensions: 15.75 x 8.27 x 3.47 Inches (2U)

How to Install Our HD-CVI, HD-TVI, AHD Video Distribution Amplifier?

The installation procedure of our HD-TVI, AHD, and HD-CVI video amplifiers is pretty straight-forward. Here are a few pointers on installation and troubleshooting:

Installation:
  • Connect the HD CCTV camera (AHD / HD-TVI / HDCVI) to the video input of the amplifier using a coaxial cable and a BNC connector.
  • Do check the cable capacity in Ohms before use.
  • Mount the camera and adjust the position.
  • Depending upon the interface such as CVI, TVI or AHD, the geographical distance of the coaxial cable to carry signals seamlessly is decided. This can range from 600 to over 2000 feet.
  • Coaxial cables of RG59 or RG6 types connect the video output of the amp to the DVR.
  • Make sure the power lead is connected to the positive and negative terminals on the amplifier. This power lead should also be connected to the DC power supply.
  • Adjust the brightness and gain frequency for enhanced picture quality.
  • We suggest using a ground cable.
  • Test the functioning thoroughly at factory level to check the operation.

Troubleshooting:

  • Refer to the instruction manuals and check the circuit diagrams in case of an issue.
  • Check all the physical parameters such as exposure to excess heat, dust, dirt, moisture, and so on.
  • Also check for loose connections, wiring, if connectors have come off, and so on.
  • In case the system does not function normally, contact the team at VERSITRON. We would happy to assist you.

Applications of Video Distribution Amplifiers

Our video distribution amplifiers are used in security and surveillance as well as broadcasting and industrial security segments across industries including mission critical ones such as defense. Basically, they can be used in all segments where multiple monitoring locations are present. Here are some of the application areas of our CCTV video distribution amplifiers:

  • Television production facilities
  • Cable operation centers
  • Production and post-production facilities
  • Industrial CCTV applications
  • Satellite operations
  • RF signal processing
  • Video switching and distribution
  • Defense surveillance at national borders and sensitive areas

Quality and Warranty

VERSITRON is focused on the quality of its CCTV video distribution amplifiers of all types, and their related products. Hence, we follow strict methods of testing and inspection before these products are shipped to customers. As with all VERSITRON products, our HD-TVI, HD-CVI, and AHD video distribution amplifiers have a lifetime warranty. Please refer to our warranty statement for a detailed explanation regarding warranty claims and procedures.

High Definition VersiVision Series devices are designed to distribute video inputs to multiple outputs to help enhance HD signals and offer excellent picture quality. VERSITRON offers the same in various video inputs and outputs. Our CCTV video distribution amplifiers are extremely suitable for all sorts of surveillance applications and can be operated with simple BNC connectors. In case you have any questions about these products, please contact us through email or phone. We look forward to speaking with you.