For efficient and reliable connectivity from the network edge device to a backbone switch or server, this managed gigabit switch is designed to extend existing LANs through one 100/1000Base-SX/LX SFP interface using either one or two multimode or singlemode fibers. Full power PoE at 30W is applied to all six ports with no power sharing, and added port circuit protection isolates and prevents power interference between ports. The
Industrial Managed Switches are fully managed Layer 2 switches not only incorporating the industry standard Rapid Spanning Tree Protocol (IEEE802.1w RST), but also a rapid ring recovery protocol enabling operational network recovery in the event of a network or power system failure. These switches are also designed with a redundant power supply to further enhance network reliability and stability. Housed in rugged DIN rail or wall mountable enclosures, the switches are well suited for harsh environments such as industrial security, system automation applications and ITS.
Typical Applications
-
PoE/PoE+ operation of IP Cameras, with pan-tilt-zoom capability
-
PoE/PoE+ operation of IP cameras with heated/cooled housings
-
PoE/PoE+ operation of transportation-specific/ITS field equipment
-
Any networks using Power over Ethernet devices such as IP cameras, intercoms,
access control, telephones, variable message signs, etc
Product Features
-
6-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
-
1-Port 100/1000Base-SX/LX/EX/BX SFP Type Ports
-
PoE Compatible: IEEE 802.3af and 802.3at compliant for PoE and PoE Plus
-
Non-blocking store-and-forward switching
-
RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
-
Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
-
Available for operation in Ring or point-to-point configuration
-
Real-time monitoring via Embedded Surveillance Device Management System
-
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
-
Distances up to 100 km with optional SFPs
-
Available for operation over single mode or multimode fiber over a variety of link budget
-
Available for operation over 1 or 2 fibers
-
No in-field optical adjustment required
-
Redundant dual power supply inputs 48/52 VDC
-
4KV Ethernet Surge Protection for harsh environment
-
-40°C to 80°C (-40°F to 176°F) wide range operating temperature
-
Compact, corrosion resistant case attaches to a standard DIN Rails
Technical Specifications
Copper Ports (RJ45) |
6-10/100/1000Base-T |
SFP Uplink Ports |
1-100/1000Base-SX/LX/EX/BX SFP |
Port Configuration |
Auto MDI/MDI-X |
Port Speed |
Auto-negotiate |
Switch Architecture |
Store-and-forward |
Switch Bandwidth |
17Gbps (non-blocking) |
MAC Address |
8K Entries |
Maximum Frame Size |
9.6K Bytes (Jumbo Frames) |
Flow Control |
Back pressure (Half-Duplex)
IEEE 802.3x Pause Frame (Full-Duplex) |
Fiber Data Rate |
1000Base-SX/LX/EX/BX |
Fiber Connector |
SFP (Mini-GBIC) port |
Fiber Type/Distance |
Varies by SFP Module |
PoE Standard |
IEEE 802.3af
IEEE 802.3at |
Power Supply Type |
End-Span (PSE) |
PoE Power Output |
48VDC, 15.4 Watts
52VDC, 30 Watts |
Power Pin Assignment |
½ (+), 3/6(-) default |
LED Indicators |
Power: On/Green
Ethernet: 10/100 LNK/ACT – Amber
1000 LNK/ACT – Green
SFP Port: On/Blink – Green |
Management Interface |
Console CLI, telnet, Web browser, SSH/SSL secure access
SNMPv1 and v2c and v3c |
Port Configuration |
Enable/disable; Auto-negotiation;
10/100/1000Mbps full-and-half duplex mode selection; Flow control |
Port Mirroring |
TX/RX Both; Many to 1 monitoring |
Bandwidth Control |
Ingress/Egress rate control:
Configure (100~1000000Kbps)
Full Speed 1000000Kbps |
VLAN |
IEEE 802.1q tagged-based VLAN
Up to 256 VLAN IDs Port-Based VLAN
Port-Based VLAN, Q-in-Q tunneling
Mac-based VLAN, up to 256 VLANs
Protocol-based VLAN, up to 128 VLANs
MVR (Multiple VLAN Registration) |
Link Aggregation |
IEEE 802.3ad LACP / Static Trunk;
Up to 5 groups of trunk supported |
QoS |
8 priority queue
Traffic classification based on:
IEEE802.1p Based Cos,
IP DSCP Based Cos, |
Multicasting/IGMP |
IGMP/MLD Snooping (v1,v2,v3)
With Query supported |
Access Control List |
IP-Based ACL/MAC-Based ACL,
256 entries |
SNMP MIBs |
RFC-1213 MIB-II
RFC-2819 RMON MIB (Group 1,2,3,9) |
DC Power Input Voltage |
DC~52V, Auto-sensing |
Full Load Power
Consumption |
9 Watts |
Dimensions |
156 x 114.8 x 60mm |
Case |
IP44 Metal Case |
Housing |
DIN Rail Mounting |
MTBF |
>100,000 hours |
Operating Temperature |
-40°C ~ +80°C |
Storage Temperature |
-40°C ~ +80°C |
Relative Humidity |
0% ~ 95% (non-condensing) |