2-Channel Video Installation Kit | Bi-directional Data/Audio, Multimode ST, MM fiber cable

FVMTR2BB3A

The FVMTR2BB3A installation kit includes 2-channel video transmitter and receiver devices for converting an analog CCTV signal over fiber. These units support 2-channels of bi-directional data as well as 2-channels of bi-directional audio. Power supplies and 100 meters of Multimode fiber cable are also provided.  

FVMTR2BB3A: 2-Channel Digital Fiber Optic Video Converter Installation Kit

VERSITRON’S VersiVision Product Series

Everything you need in a complete package for connecting your analog camera to your monitoring equipment. The FVMTR2BB3A supports 8-bit digitally encoded broadcast quality video over one multimode optical fiber. Not only do these devices support NTSC, PAL, and SECAM camera systems, they provide additional signaling capability for bi-directional data and audio.

*All VersiVision Installation Kits include: Transmitter, Receiver, Power Supplies & 100 Meters of Fiber.

ST optical connectors are standard for both standalone and rackmount versions. For applications requiring several receiver units at your monitoring site, we offer an 18-Slot rackmount chassis that fits a standard 19" rack.

Technical Specifications of FVMTR2BB3A: 2-Channel Digital Fiber Optic Video Converter

Video Input

2 Volt pk-pk (75 Ohms)

Input/Output Channels

2

Bandwidth

5 Hz – 8 MHz

Bit Resolution

8 – Bit

Differential Gain

< ±1%

Differential Phase

< ±1°

Tilt

< 1%

S/N Ratio

60dB (Weighted)

Wavelength - MM

850/1310nm

Number of Fibers

1

Audio Channels

Two Bi-directional

Audio Impedance

600 Ohms

Input/Output Voltage

2.0Vp-p

Frequency Response

10Hz – 20KHz

Bit Resolution

24-bit

S/N Ratio

>95db (Weighted)

Video Connector

BNC

Optical Connector

ST

Power Supply

5VDC, 2A

Data Interface

RS-485 (RS-422, RS-232 Optional)

Data Rate

Up to 300 Kbps

Data Channels

Two Bi-Directional

Bit Error Rate

10⁻⁹

Data/Audio/CC Connector

Screw Terminal Strip

MTBF

>100,000 Hours

Operating Temperature

-35°C to +65°C

Storage Temperature

-45°C to +85°C

Relative Humidity

0% to 95% (non-condensing)


2-Channel Digital Fiber Optic Video Converter Installation

Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. LED indicators are provided to instantly monitor the system operating status. A typical installation utilizes a transmitter unit at the camera end of the link, connected via a single fiber optic cable, to a receiver unit at the monitoring end of the link. These products are currently in use in some states for monitoring traffic. All the advantages of fiber apply – protection from lightning strikes, greater distances supported for less cost, immunity to EMI & RFI, increased bandwidth to handle more data, voice and video transmission.

As with all VERSITRON products, these video converters carry a lifetime warranty. Please give us a call (1-800-537-2296) or open a chat with any questions. We would be delighted to speak with you!

Key Features of FVMTR2BB3A: 2-Channel Digital Fiber Optic Video Converter

  • 8-Bit Uncompressed Video Transmission
  • 24-Bit Digitally Encoded Audio
  • NTSC, PAL, or SECAM Camera System Compatible
  • RS-485 Data Protocol
  • RS-232 and RS-422 data protocols optional
  • Transmit up to 30km without Optical Attenuation WDM Technology for Higher Reliability No EMI, RFI, Cross Talk, or Video Distortion No Electrical or Optical Adjustments Required LED Indicators for Instant System Monitoring Hot-Pluggable Standalone or Rackmount in FVC18 Chassis VersiVision Chassis