Description Technical Specification Key Features Resources & Downloads
For fast and efficient connectivity from the network edge device to a backbone switch or server, the Gigabit switch is designed to extend existing LANs through one 100/1000Base-SX/LX interface using either one or two multimode or singlemode fibers. These switches are also designed with a redundant power supply to further enhance network reliability and stability. Housed in rugged DIN rail or wall mountable enclosures, the switches are well suited for harsh environments such as industrial security, system automation applications and ITS.
Typical Applications
Any network utilizing a mix of copper and fiber
Industrial IP connectivity and communication
Self-healing Fast Ethernet backbone networks
Networks using Ethernet devices such as network cameras, access control, intercoms, etc.
Copper Ports (RJ45) 8-10/100/1000Base-T
SFP Uplink Ports 2-1000Base-SX/LX/EX/BX SFP
Port Configuration Auto MDI/MDI-X
Port Speed Auto-negotiate
Switch Architecture Store-and-forward
Switch Bandwidth 21Gbps (non-blocking)
MAC Address 4K entries
Maximum Frame Size 9.6Kbps (Jumbo Frames)
Flow Control Back pressure (Half-Duplex) IEEE 802.3x Pause Frame (Full-Duplex)
Fiber Data Rate 1000Base-SX/LX/EX/BX
Fiber Connector LC Connector (SFP)
Fiber Type/Distance Varies by SFP module
LED Indicators Power: On/Green
DC Power Input Voltage 9~52V, Auto-sensing
Full Load Power Consumption 9 Watts
Dimensions 156 x 114.8 x 60mm
Case IP44 Metal Case
Housing DIN Rail Mounting
MTBF >100,000 hours
Operating Temperature -40°C to +80°C
Storage Temperature -40°C to +80°C
Relative Humidity 0% to 95% (non-condensing)
8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
1-Port 1000Base-SX/LX/EX/BX SFP Type Ports
Non-blocking store-and-forward switching
RJ45 Port supports 10/100/1000Mbps-Ful/Half-duplex, Auto—negotiation, Auto-MDI/MDIX
Prevents Packet Loss w/Back Pressure (Half-Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full-Duplex)
Uses interchangeable SFP modules for fiber type, distance, and connector. (Ordered Separately)
Distances up to 100 km with optional SFPs
Available for operation over singlemode or multimode fiber over a variety of link budget
Available for operation over 1 or 2 fibers
No in-field optical adjustment required
Redundant dual power supply inputs 48/52 VDC
4KV Ethernet Surge Protection for harsh environment
-40°C to 80°C wide range operating temperature
Compact, corrosion resistant case attaches to a standard DIN Rail
