Description
Technical Specification
Key Features
Resources & Downloads
Applications
For fast and efficient connectivity from the network edge device to a backbone switch or server, the managed Gigabit switch is designed to extend existing LANs through two 100/1000Base-SX/LX SFP interfaces using either one or two multimode or singlemode fibers. The Industrial Managed Switches are fully managed Layer 2 switches not only incorporating the industry standard Rapid Spanning Tree Protocol (IEEE802.1w RSTP), but also a rapid ring recovery protocol enabling operational network recovery in the event of a network or power system failure.
Typical Applications
Any network utilizing a mix of copper and fiber
Industrial IP connectivity and communication
Self-healing Fast Ethernet backbone networks
Networks using Ethernet devices such as network cameras, access control, intercoms, etc.
28-Port Managed Industrial Switch SF72860M Review
Layton Gant
4.0 out of 5 stars
Feb 28, 2025
The SF72860M has been a solid upgrade for our industrial network. With 28 ports, it gives us plenty of room to connect more devices as our setup grows. Even in harsh conditions, it keeps everything running fast and stable without any hiccups. The management features make it easy to monitor and configure the network, which has helped us optimize performance without extra hassle. If you need a reliable and scalable switch for a larger industrial setup, this one does the job well.
Copper Ports (RJ45)
24-10/100/1000Base-T
SFP Uplink Ports
2-100/1000Base-SX/LX/EX/BX SFP
Combo Ports
2-RJ45/SFP
Port Configuration
Auto MDI/MDI-X
Port Speed
Auto-negotiate
Switch Architecture
Store-and-forward
Switch Bandwidth
26Gbps (non-blocking)
MAC Address
8K Entries
Maximum Frame Size
9.6K Bytes (Jumbo Frames)
Flow Control
Back pressure (Half-Duplex) IEEE 802.3x Pause Frame (Full-Duplex)
Fiber Data Rate
1000Base-SX/LX/EX/BX
Fiber Connector
SFP (Mini-GBIC) port
Fiber Type/Distance
Varies by SFP Module
Power Pin Assignment
½ (+), 3/6(-) default
LED Indicators
Power: On/Green Ethernet: 10/100 LNK/ACT – Amber 1000 LNK/ACT – Green SFP Port: On/Blink – Green
Management Interface
Console CLI, telnet, Web browser, SSH/SSL secure access SNMPv1 and v2c and v3c
Port Configuration
Enable/disable; Auto-negotiation; 10/100/1000Mbps full-and-half duplex mode selection; Flow control
Port Mirroring
TX/RX Both; Many to 1 monitoring
Bandwidth Control
Ingress/Egress rate control: Configure (100~1000000Kbps) Full Speed 1000000Kbps
VLAN
IEEE 802.1q tagged-based VLAN Up to 256 VLANs groups, out of 4094 VLAN IDs Port-Based VLAN, Q-in-Q tunneling Mac-based VLAN, up to 256 VLANs Protocol-based VLAN, up to 128 VLANs MVR (Multiple VLAN Registration)
Link Aggregation
IEEE 802.3ad LACP / Static Trunk; Up to 5 groups of trunk supported
QoS
8 priority queue Traffic classification based on: IEEE802.1p Based Cos, IP DSCP Based Cos,
Multicasting/IGMP
IGMP/MLD Snooping (v1,v2,v3) With Query supported
Access Control List
IP-Based ACL/MAC-Based ACL, 256 entries
SNMP MIBs
RFC-1213 MIB-II RFC-2819 RMON MIB (Group 1,2,3,9)
Power Input Voltage
100-240VAC, 50/60Hz
Full Load Power Consumption
18 Watts
Dimensions
483 x 280 x 45mm
Case
IP30 Metal Case
Housing
DIN Rail Mounting
MTBF
>100,000 hours
Operating Temperature
-40°C ~ +80°C
Storage Temperature
-40°C ~ +80°C
Relative Humidity
0% ~ 95% (non-condensing)
24-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
2-Port 1000Base-SX/LX/EX/BX SFP Type Slots
2-Port RJ45/SFP Combo Slots
Non-blocking store-and-forward switching
RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
Available for operation in Ring or point-to-point configuration
Real-time monitoring via Embedded Surveillance Device Management System
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
Distances up to 100 km with optional SFPs
Available for operation over single mode or multimode fiber over a variety of link budget
Available for operation over 1 or 2 fibers
No in-field optical adjustment required
4KV Ethernet Surge Protection for harsh environment
-40°C to 80°C (-40°F to 176°F) wide range operating temperature
Compact, corrosion resistant case attaches to a standard DIN Rails
28-Port Managed Industrial Switch is used across the following Industries:
Industrial Automation & Control
Machine-to-machine Ethernet communication
PLC and SCADA integration networks
Real-time monitoring of production lines
Fiber uplinks for remote control units
Manufacturing Plants
Robotics system connectivity
High-speed data transfer for assembly lines
IoT-enabled equipment networks
Redundant backbone connections
Transportation & Intelligent Traffic Systems
Traffic signal and controller networks
Railway and mass transit communications
Long-distance SFP connections for remote sites
Monitoring and control of ITS field devices
Energy & Utility Networks
Smart grid Ethernet networks
Substation automation connectivity
SCADA and relay system integration
Renewable energy monitoring networks
Oil, Gas & Petrochemical
Pipeline and refinery monitoring
Remote well-site network links
Process control communications
Hazardous location fiber connections
Telecommunications & ISP Networks
Gigabit access points for customers
Fiber backhaul for high-speed networks
Redundant network aggregation
Outdoor industrial cabinet deployments
Smart Cities & Municipal Networks
Citywide surveillance systems
Smart lighting infrastructure
IoT sensor connectivity
Traffic and environmental monitoring
Healthcare Facilities
IP camera networks for hospital security
Medical device connectivity over Ethernet
Data center connections within hospitals
Fiber uplinks for remote facilities
Educational Institutions
Campus-wide IP networks
Classroom access point connectivity
Dormitory fiber backbone links
VoIP phone system integration
Defense & Aerospace
Secure network operations
Field communication infrastructure
Fiber-connected monitoring systems
Industrial-grade network reliability
Maritime & Ports
Port automation and crane control
Dockside security and surveillance
Shipyard network connectivity
Fiber-fed industrial Ethernet links
Water & Wastewater Treatment
Pump station monitoring
Environmental sensor networks
Remote SCADA system integration
Redundant backbone connections
Mining & Heavy Industry
Harsh environment industrial networks
Remote machine monitoring
Safety and process monitoring
Fiber-based communications for long distances
Versitron is one of the leading 28-Port Managed Industrial Switch manufacturers in the USA (based in Delaware). If your industry or application isn't listed above, feel free to reach out to us!
Buy the Best 28-Port Managed Industrial Switch from VERSITRON at a Competitive Price!!