Description Technical Specification Key Features
The Gigabit Ethernet RJ45 ports on the 18-port PoE switch support various half/full duplex mode, auto-negotiation, ensuring seamless connectivity and high-speed data transfer.It supports interchangeable SFP modules for various types of fiber, connectors, and distances facilitating connectivity over the distances up to 100 km. Whether you multimode or single-mode fiber, this switch can be easily adapted to your specific requirements without in-field optical adjustments.
This 18 port managed switch complies with IEEE 802.3af and 802.3at standards for Power over Ethernet (PoE) and PoE plus and delivers up to 30 watts of power to connected devices. The non-blocking store and forward switching architecture combined with Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex) guarantees efficient data transmission with no packet loss.
Our 18-port gigabit switch is configurable in point-to-point and ring setups, making it suitable for different network topologies. Features like real-time monitoring capabilities via an Embedded Surveillance Device Management System enhance network management and visibility.
This 18-port PoE switch is a reliable choice, capable of withstanding harsh environmental conditions with ease. It is designed to operate consistently across a wide temperature range of -40°C to 80°C (-40°F to 176°F) and features like 4KV Ethernet Surge Protection and redundant dual power supply inputs, ensuring uninterrupted operation even in the event of power failure. You can trust this switch to keep your network running, no matter the conditions.
Typical Applications
Manufacturing
Surveillance
Access Control Systems
Industrial Automation
Traffic Management
Telecommunications
Environmental Monitoring
Energy Management
Industrial IoT (IIoT)
Critical Infrastructure
Copper Ports (RJ45) 16-10/100/1000Base-T
SFP Uplink Ports 2-100/1000Base-SX/LX/EX/BX SFP
Port Configuration Auto MDI/MDI-X
Port Speed Auto-negotiate
Switch Architecture Store-and-forward
Switch Bandwidth 36Gbps (non-blocking)
MAC Address 8K Entries
Maximum Frame Size 9.6K Bytes (Jumbo Frames)
Flow Control Back pressure (Half-Duplex)
Fiber Data Rate 1000Base-SX/LX/EX/BX
Fiber Connector SFP (Mini-GBIC) port
Fiber Type/Distance Varies by SFP Module
PoE Standard IEEE 802.3af
Power Supply Type End-Span (PSE)
PoE Power Output 48VDC, 15.4 Watts
Power Pin Assignment ½ (+), 3/6(-) default
LED Indicators Power: On/Green
Management Interface Console CLI, telnet, Web browser, SSH/SSL secure access
Port Configuration Enable/disable; Auto-negotiation;
Port Mirroring TX/RX Both; Many to 1 monitoring
Bandwidth Control Ingress/Egress rate control:
VLAN IEEE 802.1q tagged-based VLAN
Link Aggregation IEEE 802.3ad LACP / Static Trunk;
QoS 8 priority queue
Multicasting/IGMP IGMP/MLD Snooping (v1,v2,v3)
Access Control List IP-Based ACL/MAC-Based ACL,
SNMP MIBs RFC-1213 MIB-II
DC Power Input Voltage DC 9~52Volts
Full Load Power Consumption
18 Watts
Dimensions 483 x 280 x 45mm
Case IP30 Metal Case
Housing DIN Rail Mounting
MTBF >100,000 hours
Operating Temperature -40°C ~ +80°C
Storage Temperature -40°C ~ +80°C
Relative Humidity 0% ~ 95% (non-condensing)
16-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
2-Port 100/1000Base-SX/LX/EX/BX SFP Type Ports
PoE Compatible: IEEE 802.3af and 802.3at compliant for PoE and PoE Plus
Non-blocking store-and-forward switching
RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
Available for operation in Ring or point-to-point configuration
Real-time monitoring via Embedded Surveillance Device Management System
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
Distances up to 100 km with optional SFPs
Available for operation over single mode or multimode fiber over a variety of link budget
Available for operation over 1 or 2 fibers
No in-field optical adjustment required
Redundant dual power supply inputs 48/52 VDC
4KV Ethernet Surge Protection for harsh environment
-40°C to 80°C (-40°F to 176°F) wide range operating temperature
Compact, corrosion resistant case attaches to a standard DIN Rails
