
VersiVision
FVT1000/FVR1000 Series
FM Fiber Optic Video Modems
Transmitters and Receivers
|
|
|
|
The VersiVision FM video converters have been updated with digital technology. Our FM products have been archived.
Take Me to the 1 Channel Digital Video Converter Page
Show Me All Digital Video Converter Options |
Welcome to our new world of CCTV video security system products. On this page, you will find fiber optic transmitters and receivers for transmission of an FM video signal over fiber optic cable. If you need to transmit an FM video signal and a data signal, please visit our data and video transmission page.
Need Digital Fiber Optic Video and Video Mux Products?
As with all VERSITRON products, these video transmitters carry a lifetime warranty.
|
|
Please give us a call (1-800-537-2296) or open a chat with any questions. We would be delighted to speak with you.
|
Technical Data
GENERAL DESCRIPTION
VersiVision FVT1000 and FVR1000 Series Fiber Optic Video Modems are used to extend a frequency modulation (FM) video signal over a single fiber optic cable. These modems provide high quality transmission of one channel simplex video at distances to 3 km using multimode fiber and distances to 40 km using singlemode fiber. A BNC connector provides the copper interface for the video input/output. ST and SC optical connectors are standard for the fiber optic interface. The FVT1000 and FVR1000 video modems are completely compatible with NTSC, PAL, or SECAM video standards.
The FVT1000 transmitter and FVR1000 receiver modems are available as standalone devices for easy plug and play installation. In addition, the FVR1000 receiver modems can be ordered as circuit card modules for installation in the Model FVC-14 rack-mount chassis. The 14-slot chassis fits in a standard 19 " rack and is offered with either 110VAC or 220VAC power supplies.
KEY FEATURES
VersiVision FVT1000 and FVR1000 Series Fiber Optic Video Modems utilize APC circuitry while maintaining stable optical power output. Other features include:
- 8-Bit Digitally Encoded Video Transmission
- Immunity from EMI, RFI, and Ground Loops
- AD, Pelco, Phillips, and Vicon Communication Protocols Supported
- Plug and Play Design
- LED Status Indicators include video sync present (VIDEO), and power on (POWER)
|
| |
|
SELECTION GUIDE
|
Transmitters
|
| Model |
FVT1003
|
FVT1004
|
FVT1005
|
| Fiber/Wavelength |
MM/1310nm
|
MM 1310nm
|
SM 1310nm
|
| Distance |
3 km
|
3 km
|
30 km
|
| Connector |
ST
|
SC
|
SC
|
|
Standalone Receivers
|
| Model |
FVR1003
|
FVR1004
|
FVR1005
|
| Fiber/Wavelength |
MM/1310nm
|
MM 1310nm
|
SM 1310nm
|
| Distance |
3 km
|
3 km
|
30 km
|
| Connector |
ST
|
ST
|
SC
|
|
Receiver Modules *
|
| Model |
FVR1003M
|
FVR1004M
|
FVR1005M
|
| Fiber/Wavelength |
MM/1310nm
|
MM 1310nm
|
SM 1310nm
|
| Distance |
3 km
|
3 km
|
30 km
|
| Connector |
ST
|
ST
|
SC
|
* Modules are installed in Model FVC-14 chassis.
TECHNICAL SPECIFICATION
General
| Model |
FVT1003, FVR1003, FVT1004, FVR1004, FVT1005, FVR1005 |
| Dimensions |
(7.5" L x 6.3" W x 1.2" H)
(19 L x 16W x 3.2H cm) |
| Weight |
0.5 kg (1.1 lb) |
| Operating Temperature |
-30°C to+70°C |
| Storage Temperature |
-40°C to +85°C |
| Humidity |
0% to 95% relative humidity (non-condensing) |
| Altitude |
Up to 10,000 ft. |
| Model |
FVR1003M, FVR1004M, FVR1005M, |
| Dimensions |
(7.5" L x 5.1W" W x 1.0" H)
(19 L x W x H cm) |
| Weight |
0.18 kg (0.4 lb) |
| Operating Temperature |
-30°C to+70°C |
| Storage Temperature |
-40°C to +85°C |
| Humidity |
0% to 95% relative humidity (non-condensing) |
| Altitude |
Up to 10,000 ft. |
ELECTRICAL INTERFACE
| Model |
All Models |
| Power Requirements |
+9 VDC@650mA; -9VOC@100mA |
| Video Impedance |
75 ohm |
| Video Input |
1 volt peak to peak |
| Bandwidth |
5 Hz to 8 MHz |
| Differential Gain |
< 3% |
| Differential Phase |
< 3° |
| Tilt |
< 1% |
| Signal-to-Noise Ratio |
60dB |
| FM Carrier Technology |
70 Hz to 150 Hz |
| Connector |
BNC |
| Power Consumption |
7W (max) |
FIBER OPTIC INTERFACE
| Model |
FVT1003/FVR1003, FVR1003M
|
FVT1004/FVR1004, FVR1004M
|
FVT1005/FVR100, FVR1005M
|
| Wavelength |
1310nm multimode
|
1310nm multimode
|
1310nm singlemode
|
| Connector |
ST
|
SC
|
SC
|
| Link Budget |
10 dB
|
10 dB
|
25 dB
|
| Operating Range |
3 km
|
3 km
|
30 km
|
ACCESSORIES
|
Model #
|
Description
|
Weight
|
|
FVC-14-110
|
14-slot, 19" rack-mount chassis, 110VAC |
14 lbs. (6.3 kg)
|
|
FVC-14-220
|
14-slot, 19" rack-mount chassis, 220VAC |
15 lbs. (6.8 kg)
|
|
|
VERSITRON INC.
83 Albe Drive - Suite C - Newark, DE 19702
Need Help? Call 1-800-537-2296, or 302-894-0699 Fax. 302-894-0624
www.versitron.com
fiberlink@versitron.com
|
|
| |