M7250
1000BaseT-SX/LX
OR
M7260M
10/100/1000BaseT-SX/LX
Single Fiber Gigabit Media Converter
|
|
|
|
If you need a single fiber media converter with gigabit speeds, these products should fill the bill. They also sport
GBIC Module Technology, are compatible with other NICs
and Switches, and carry a lifetime warranty.
KEY FEATURES - M7250
- Complies with 802.3ab 1000BaseT and 802.3z 1000BaseSX, 1000BaseLX
- Provides direct media conversion for Gigabit copper and Gigabit fiber
- Supports full wire speed conversion
- Supports transparent conversion of any packet type with no length limitation
- Supports auto-negotiation with link partners
- Extends network span to 40km
- Interoperable with other 1000Base-X NICs or Gigabit switches
- Rackmount Chassis or Optional Din-Rail installation
- Low power consumption
- Options for CWDM
KEY FEATURES - M7260
- Tri-Speed 10/100/10000Mbps Copper to 1000M Fiber Conversion
- Supports full wire speed conversion
- Supports auto-negotiation with link partners
- Provides Loop Back Test Function
- DIP Switches for Port Operating Mode, Flow Control, Status Monitoring
- Provides Monitoring Function for Remote Link Partner's Copper Link Status
- Optional Web-Based Management
- Supports Tagged/Untagged Packet Filtering
- Supports 802.1Q VLAN, 802.1p QoS, DSCO Priority Classifications
- Supports Q-in-Q application with Double Tag Capability
- Supports SNMP Trap for Port Link Change
- Supports SFP GBIC Module Technology
|
|
|
| Standards: |
IEEE 802.3ab, 802.3z |
| Copper Port: |
Shielded RJ-45
1000Mbps
Auto-negotiation capable
Auto-MDI/MDI-X |
| Fiber Port: |
LC (SFP Mini-GBIC) Connector |
| Network Cables: |
Copper Port: Cat.5e recommended or higher up to 100m
Fiber Port: Singlemode - 9/125µm fiber cable |
| LED Indicators-M7250: |
Power Status, SFP On status, Link status, Optical Link status |
| LED Indicators-M7260M: |
Power, Local/Remote Copper Port Status: LInk/Speed/duplex, Local Fiber Port Link Status, Loop Back Test Status, Far End Fault Function |
| Mounting: |
Desktop, Wall, Din-Rail (optional), Center Chassis |
| Rackmount Chassis: |
Up to 16 units in one rack chasis with one central power source
Supports optional power redundancy and management |
| Environment: |
Operating
Temperature: |
−5º C ~ 55º C |
Storage
Temperature: |
−20º C ~ 85º C |
Relative
Relative Humidity: |
10% ~ 90% non-condensing |
| Dimensions: |
4.25 x 2.85 x 0.91 inch (108 x 72.5 x 23 mm) |
| Power Input: |
+5 ~ +12VDC (+/−5%) |
| Power Consumption: |
2 watts max @ 7.5VDC |
|
|
Available SFP GBIC Modules (Ordered Separately)
| Model |
Fiber |
Wavelength |
Connector |
Distance |
TX Power |
RX Sens |
| GBMM |
Multimode SX (62.5/125)
Multimode SX (50/125) |
850nm
850nm |
LC
LC |
220m
550m |
-9.5 ~
-4 |
< -18 |
| GB2MM |
Multimode LX
|
1310nm
|
LC |
2km
|
-9 ~ -4 |
< -19 |
| GB10SM |
Multimode LX
Singlemode LX |
1310nm
1310nm |
LC |
550m
10 Km |
-9.5 ~
-3 |
<-20 |
| GB20SM |
Singlemode LX |
1310nm |
LC |
20 Km |
-4 ~ +1 |
< -24 |
| GB40SM |
Singlemode LX |
1550nm |
LC |
40 Km |
-4 ~ +1 |
< -24 |
| GB70SM |
Singlemode LX |
1550nm |
LC |
70 Km |
0 ~ +5 |
< -24 |
| GB10SFA |
Singlemode LX |
Tx: 1310nm
Rx: 1550nm |
LC |
10 Km |
-3 ~ -9 |
< -21 |
| GB10SFB |
Singlemode LX |
Tx: 1550nm
Rx: 1310nm |
LC |
10 Km |
-3 ~ -9 |
< -21 |
| GB20SFA |
Singlemode LX |
Tx: 1310nm
Rx: 1550nm |
LC |
20 Km |
-3 ~ -8 |
< -23 |
| GB20SFB |
Singlemode LX |
Tx: 1550nm
Rx: 1310nm |
LC |
20 Km |
-3 ~ -8 |
< -23 |
| GB40SFA |
Singlemode LX |
Tx: 1310nm
Rx: 1550nm |
LC |
40 Km |
-3 ~ +2 |
< -23 |
| GB40SFB |
Singlemode LX |
Tx: 1550nm
Rx: 1310nm |
LC |
40 Km |
-3 ~ +2 |
< -23 |
| GB40SFCxx |
Singlemode LX |
Tx: xx =1xx0nm
Rx =1100-1650nm |
LC |
40 Km |
-5 ~ 0 |
< -24 |
| GB80SFCxx |
Singlemode LX |
Tx: xx =1xx0nm
Rx =1100-1650nm |
LC |
80 Km |
-5 ~ 0 |
< -24 |
Note: Temperature Range for all GBIC Modules = 0 to 70°C |
|
|
VERSITRON INC.
83 Albe Drive - Suite C - Newark, DE 19702
Need Help? Call 1-800-537-2296, or 302-894-0699 Fax. 302-894-0624
www.versitron.com
fiberlink@versitron.com
|
|
