10/100TX-100FX
Single Fiber Media Converter

 

Able to transmit and receive over one fiber, this product can cut your cable bill in half! So, if you need to keep the costs of fiber cable down, this converter could be the answer.

AND this new converter can accommodate either 10base or 100base networks or both--making it a "Double Duty" converter with the following 3 setting options:

  • 10/100 autosensing
  • 10base fixed
  • 100base fixed

These settings allow you to customize your network with one product at the flick of a switch. 4 Chassis options are also available including regular power, redundant power, and management features. And, as with all VERSITRON product, these products carry a lifetime warranty.

KEY FEATURES:

  • Converts speed and media type
  • Supports full wire speed conversion
  • Supports 10/100M dual speed on TP connections
  • Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
  • Link fault pass-through function
  • Transparent to 802.1Q VLAN tagged packets
  • Far End Fault function on FX port
  • Supports desktop, wall and center chassis mounting
  • Low Power consumption
  • Supports options of single SC, single fiber over 20 km or 40 km fiber optic cable
  • Provides user accessible settings for TP port configuration, disabling link fault pass-through function
  • Provides optional user-inaccessible settings for specific system applications
  • Provides indications of remote media converter's TP port status
  • Provides Loop Back Test function with connected remote media converter

SPECIFICATIONS:

Cables: Cat. 5 UTP
SMF: 9/125µm
TP Port: 802.3 10BaseT, 802.3u 100BaseTX
Shielded RJ-45 jacks with Auto MDI/MDI-X detection
Auto-negotiation for speed and duplex auto detection
Forced mode with speed and duplex settings
Speed for 10Mbps or 100Mbps
Full duplex or half-duplex support
FX Port: 802.3u 100BaseFX compliant
Forced 100Mbps, Full duplex (factory default)
Far end fault Function
Packet Size: Up to 1522 bytes for store-and-forward mode
LED Indicators: Power Status
TP Ports: Link/Act, Speed, Suplex status
FX Ports: Link/Act status, Fiber signal detected
Remote TP Ports: Link, Speed, Duplex status
Configuration Switches: Accessible settings:
TP port mode,TP port duplex, TP port speed
Link fault pass through, Auto status report
Inaccessible settings: Forwarding mode, FX duplex, 802.3x function
Environment:
Operating -15º C to +40º C
Temperature:
Storage -20º C to +80º C
Temperature:
Relative 5% to 90% non-condensing
Humidity:
Dimension: 4.25 x 2.85 x 0.91 inch (108 x 72.5 x 23 mm)(L x W x H)
Power Input: +5 to+12VDC (+/- 5%)
Weight: .47 lb (213g)

Ordering Information

Model Connector Fiber Cable Wavelength TX Power RX Sensitivity Max Distance
M7275S-2SFA SC Single Fiber SMF TX 1310nm -14 ~ -8dBm -33dBm 20 km
M7275S-2SFB SC Single Fiber SMF TX 1550nm -14 ~ -8dBm -33dBm 20 km
M7275S-4SFA SC Single Fiber SMF TX 1310nm -8 ~ -3dBm -33dBm 40 km
M7275S-4SFB SC Single Fiber SMF TX 1550nm -8 ~ -3dBm -31dBm 40 km

___Email this Page:

VERSITRON INC.
83 Albe Drive - Suite C - Newark, DE 19702
Need Help? Call 1-800-537-2296, or 302-894-0699 Fax. 302-894-0624
www.versitron.com
fiberlink@versitron.com