| |
KEY FEATURES
- (8) 10/100/1000Mbps RJ-45 ports and (2) 1000Mbps SFP slots
- Provides in-band web and SNMP management interfaces
- Copper ports with auto-negotiation and auto-MDI/MDI-X detection
- Provides full wire speed forwarding
- Support 802.3x flow control for full duplex operation
- Support back-pressure flow control for half-duplex operation
- Provides port status, statistic monitoring and control function
- Supports port-based and 802.1Q Tag-based VLAN
- Provides QoS function
- Provides port link aggregation (trunking) function and LACP support
- Provides port mirroring function
- Provides 802.1x authentication for port access
- Supports 802.1w RSTP, 802.1D STP and MSTP
- Watchdog timer function
- Optional fiber connectivity with (2) SFP slots
- Supports DHCP for dynamic IP configuration
- SF70860MP provides (4) 802.3af compliant PoE
- Supports standalone, DIN Rail, or Panel Mounting
SPECIFICATIONS
| IEEE Standards: |
802.3, 802.3ab, 802.3z, 802.3af, 802.1x, 801.1w, 802.1D, 802.1Q
|
| Network Ports: |
(6) 10/100/1000Mbps Copper Ports (RJ-45)
(2) Combo Ports – 10/100/1000Mbps Copper or 1000Mbps Fiber
|
| Copper Port: |
Shielded RJ-45, 10/100Mbps, auto-negotiation, auto-MDI/MDI-X
|
| SFP Slot: |
Gigabit 1000Base-FX compliant slot for standard SFP transceiver
|
| Console: |
Connector: Shielded RJ-45
Interface: RS-232
|
| Network Cables: |
Copper Port: Cat. 5 up to 100 meters
SFP Slot: 50/125, 62.5/125 MM Fiber, 9/125 SM Fiber
|
Power Over Ethernet:
(SF70860MP only)
|
IEEE 802.3af compliant, PSE on Ports 1-4
Power delivery 48V 15.4W max.per port up to 100 meters
|
| Mac Address: |
Table with 8K entries |
| Buffer Memory: |
112KB
|
| VLAN Function: |
Port-based VLAN, 802.1Q Tag-based VLAN
|
| Port Link Aggregation: |
Static trunking groups: 2 max., Ports/Groups: 2, LACP link aggregation
|
| QoS Function: |
4 priority queues, Classification: Port-based, 802.1p, IP DSCP |
|
LED Indicators
: |
Per Unit: Power, Management Status
Per Copper Port: 1000M, 100M, 10M Speed/Link/Activity Status
Per SFP Slot: Fiber Link Status
Per PoE Port: Power Status
|
|
Relay Output: |
Alarm: Power Failure, Specific Port Fault
Interface: 2 terminal contacts (30VDC/1A max. or 120VAC/0.5A max.)
|
|
Web Management: |
Web Browser Software
System Settings, Port Status/Statistics, Port Control, VLAN, QoS
Link Aggregation, Port Mirroring, Firmware Upgrade
802.1x, 802.1w, Configuration Backup and Restore
|
| SNMP Support: |
SNMP v1, v2c Management
MIB-II, Private MIB for PoE control, Event Traps
|
| DC Power Input: |
Screw Terminal Block: 2 pairs of +/- contacts
DC Jack: -D6.3mm / +D2.0mm
Operating Voltage Range: +6.5 ~ +60VDC
Voltage for PoE Support: +44 ~ +54VDC
|
| Power Consumption: |
9W max. with no PoE Support
70W max. with (4) PoE PSE max. Output
|
| Dimensions: |
5.51 x 4.17 x 1.57 inches (WxDxH)
|
| Environment: |
Operating Temperature: -20° C ~ +60° C
Storage Temperature: -20° C ~ +85° C
Relative Humidity: 10% to 95% non-condensing
|
| Approvals: |
FCC Class A, CE Mark Class A, EN60950 Safety
|
| Model |
Description |
| SF70860M |
8-Port 10/100/1000 Industrial Managed Switch |
| SF70860MP |
8-Port 10/100/1000 Industrial Managed Switch with PoE |
| PMB-1 |
SF70860 Panel Mounting Kit |
| DRB-1 |
SF70860 DIN Rail Mounting Kit |
| LPSUSF-POE |
SF70860MP Power Supply, 100-240VAC to 48VDC/24W |
| SFP Modules |
VERSITRON SFP Modules |
|
|
