fiberproject

10-Port 10/100/1000 Gigabit Industrial Managed Switch

SF71060M

An Industrial rated switch that provides 8-ports of 10/100/1000Mbps RJ-45 ports and 2 100/1000Mbps SFP ports.  

Technical Specifications:

IEEE Standards

802.3, 802.3ab, 802.3z, 802.3x, 802.3af, 802.3at, 802.1x, 801.1w, 802.1D, 802.1Q

Network Ports

(8) 10/100/1000Mbps Copper Ports (RJ-45)

Copper Ports

Shielded RJ-45, 10/100Mbps, auto-negotiation, auto-MDI/MDI-X

SFP Slot

100/1000Base-FX compliant slot for standard SFP transceiver

Console

Connector:  Shielded RJ-45
Interface:  RS-232

Network Cables

Copper Port:  Cat5 up to 100 meters
SFP Slot:  50/125, 62.5/125 MM Fiber, 9/125 SM Fiber

MAC Addresses

Table with 8K entries

Buffer Memory

112KB

VLAN Function

Port-based VLAN, 802.1Q Tag-based VLAN

Port Link Aggregation

Static trunking groups: 2 max., Ports/Groups: 2, LACP link aggregation

QoS Function

4 priority queues, Classification: Port-based, 802.1p, IP DSCP

LED Indicators

Per Unit:  Power, Management Status
Per Copper Port: Speed/Link/Activity Status
Per SFP Slot:  Speed/Link/Activity Status
Per PoE Port:  Power Status

Relay Output

Alarm:  Power Failure, Specific Port Fault
Interface:  2 terminal contracts (30VDC/1A max. or 120VAC/0.5A max)

Web Management

Web Browser Software
System Settings, Port Status/Statistics, Port Control, VLAN, QoS,
Link Aggregation, Port Mirroring, Firmware Upgrade
802.1x, 802.1w, Configuration Backup and Restore

SNMP Support

SNMP v1, v2c Management
MIB-II, Private MIB for PoE Control, Event Traps

DC Power Input

Screw Terminal Block:    2 pairs of +/- contacts
Operating Voltage Range:   +7 ~ +60VDC

Power Consumption

9W max.

Dimensions

5.51 x 4.17 x 1.64 inches (W x D x H)

Environment

Operating Temperature:   -40°C ~ +70°C
Storage Temperature:    -40°C ~ +85°C
Relative Humidity:   5% to 95% non-condensing

Approvals

FCC Class A, VCCI Class A, CE mark Class A, IEC 60950-1 safety,
EN 61000-6-4 emission, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2
Immunity for industrial environment, IEC 60068-2-64 Vibration,
IEC 60068-2-27 Shock 50G test, NEMA TS2 environment

  • (8) 10/100/1000Mbps RJ-45 ports and (2)100/1000Mbps SFP slots
  • Provides in-band web and SNMP management interfaces
  • Copper ports with auto-negotiation and auto-MDI/MDI-X detection
  • Provides full wire speed forwarding
  • Support 802.3x flow control for full duplex operation
  • Support back-pressure flow control for half-duplex operation Provides port status, statistic monitoring and control function Supports port-based and 802.1Q Tag-based VLAN Provides QoS function Provides port link aggregation (trunking) function and LACP support Provides port mirroring function Provides 802.1x authentication for port access Supports 802.1w RSTP, 802.1D STP and MSTP Dual DC input power options Supports DHCP for dynamic IP configuration SF71060MP provides (4) 802.3af compliant PoE Supports standalone, DIN Rail, or Panel Mounting Optional fiber connectivity with (2) SFP slots
    (See DataSheet Below) WATCH VIDEO
    (Approx. 5 minutes)