The SG71060MPB is a 10-Port 10/100/1000 Layer 2+ Managed PoE/PoE+ Ethernet switch with 2-Ports of 100/1000 SFP slots. The total PoE power budget is 250 Watts.
Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.3ad, 802.3af, 802.3at, 802.1d, 802.1w, 802.1s, 802.1p, 802.1q, 802.1x |
Network Ports |
8-10/100/1000 Mbps Copper Ports providing PoE/PoE+ power Shielded RJ-45, Auto-Negotiate, Auto-MDI/MDI-X Support 2-100/1000Mbps Fiber SFP Ports |
Network Cables |
10/100Mbps: Cat.5 up to 100m 1000Mbps: Cat.5e or higher up to 100m Multimode or Singlemode fiber with LC Connectors |
Switching Capacity |
8-10/100/1000Mbps ports with non-blocking performance 56Gbps switch capacity 8K MAC addresses Supports jumbo frames up to 10K |
VLAN |
Port-Based VLAN 802.1q Tag-Based VLAN, up to 4K active VLANs MAC-Based VLAN Management VLAN Voice VLAN |
Industrial Ring Network Protocol |
G.8032 (ERPS), Recovery time less than 20ms 255 Ring at most, Max 1024 devices per ring |
Multicast | IGMP Snooping v1/v2, Max 1024 multicast groups, Fast Log Out, MLD Snooping v1/v2 Multicast VLAN |
QoS |
Supports Port-Based, 802.1p and Diffserve (IPv4) QoS packet classification Supports SP, WRR, SP+WRR Scheduling Supports 802.1p QoS Supports 8 Output Queues per Port Supports Flow-based Packet Filtering, Redirections, Rate Limiting |
DHCP | Supports DHCP Client, Snooping, Server, Relay |
Network Security |
User Hierarchical Management and Password Protection SSH 2.0, SSL, Port Isolation, ARP Message Speed Limit Broadcast Storm Control 802.1x and MAC Address Authentication MAC Black Holes, IP Source Protection AAA and Radius, MAC Learning Limit ARP Inspection, Anti-DoS Attack IP-MAC-VLAN Port Binding |
PoE Specifications |
8-IEEE 802.3af PoE/802.3at PoE+ PSE Ports End-point with 48VDC through RJ-45 pins 1,2,3,6 PoE – PSE activity LED indicator Auto-detech powered device and consumption levels Supports per port power consumption monitoring Circuit protection to prevent power interference between ports Supports per port PoE state setting Supports per port power priority setting 250 watts of total power available Monitors PD on/off, PD detection, power level, PD status & power feeding priority |
LED Indicators |
Per Unit: Power Per Port: Link/Activity, Speed, PoE Power Status |
Management Support | L2+, Console CLI, Web Browser Software, SNMP |
Environment |
Operating Temperature: -20°C ~ 55°C Storage Temperature: -40°C ~ 75°C Relative Humidity: 5% to 95% non-condensing |
Dimensions | 10.63 x 7.12 x 1.75 inches (WxDxH) |
Power |
100-240VAC, 50-60Hz, 4.1A Consumption: <10W (no PoE devices connected) Consumption: <240W (with 8 PoE devices connected) |