4-Port Unmanaged Switch | 2-RJ45 Ethernet Ports, 2-SFP Fiber Ports


Price: $325

The 4-port SFP switch provides two 10/100/1000Mbps Ethernet ports and two 1000Mbps SFP slots, all supporting auto-negotiation and Full/Half Duplex modes. It features VLAN and QoS support, LED status indicators, and supports SFP Module Technology. The SG70460 4 port fiber optic switch is an ideal choice for extending your Ethernet network to a remote location with one or two LAN devices.

This 4-port unmanaged switch has two slots for 10/100/1000M with RJ45 connectors and two slots for 1G fiber optic SFP modules that assure stable and reliable Ethernet transmission. This switch is more appropriate for applications where linear bus topology is used. The 2 slots for 1G SFP fiber modules (sold separately) readily support a "drop-and-add" configuration at each node along the f.o. cable bus. The use of f.o. cable in this type of application can significantly improve overall network speed, while providing security and immunity to EMI/RFI.
As with all VERSITRON products, the SG70460 carries a lifetime warranty. Please give us a call (1-800-537-2296) or open a chat with any questions. We would be delighted to speak with you.

Installation of 4 Port Gigabit Ethernet Switch
During the installation, please verify that the package comprises the following:

  • (1) SG70460 4-Port Switch
  • (1) AC-DC Power Adapter
  • The user manual

Steps of installation

  • Examine the SFP slots and install the SFP module into one of them.
  • Insert the fiber optic cable into the SFP module and connect the other end to the fiber network.
  • Connect the UTP cable from the network device to the RJ-45 port.
  • Connect the power adapter to the switch and check the LED lights.
  • The SFP LEDs and TP Act will light up quickly if all connections are properly made.

Technical Specifications


802.3u, 802.3z, 802.3ab

MAC Address Table


Frame Buffer Memory


Switching Capacity



Copper Port: RJ-45
Fiber Ports: SFP Modules with LC Connectors


Copper Port: Cat5 or Higher
Fiber Ports: Multimode: 50/125 or 62.5/125
                      Singlemode: 8/125 or 9/125

Flow Control

Full Duplex: 802.3x Flow Control
Half Duplex: Back Pressure Flow Control

LED Indicators

Copper Port: Link/Activity, Speed
Fiber Ports: Link/Activity

Power Requirements

Power Supply Input: 100-240VAC, 50~60Hz
Power Supply Output: 5VDC, 3A


Operating Temperature: 0°C ~ +50°C
Storage Temperature: -20°C ~ +70°C
Humidity: 5% ~ 90% non-condensing


4.92 x 3.35 x 1.06 inches (L x W x H)
125 x 85 x 27 mm (L x W x H)

Key Features of 4 Port 10/100/10000M Gigabit Fiber Switch

4 Port Fiber switches are an integral part of several expanding networks. The switches are designed with a buffer memory and a switch controller, which allows two media types to operate smoothly. The following features of the 4-port Gigabit Network Switch makes it a popular choice:
  • Provides 2 10/100/1000Mbps Ethernet ports (RJ45)
  • Provides 2 1000Mbps SFP slots
  • All copper ports support auto-negotiation and Full/Half Duplex modes
  • Supports VLAN and QoS
  • Supports IEEE 802.3z/AB
  • LED status indicators for power, speed, link activity
  • Supports SFP Module Technology(See DataSheet Below)