10-Port Unmanaged Switch | 2-RJ45 Ethernet Ports, 8-SFP Fiber Ports


Price: $350

If you're looking to extend your network to just a few nodes using gigabit fiber, the SG10208 10 port unmanaged switch might be just what you need. This switch has eight 1000Mbps SFP slots and two 10/100/1000 Ethernet ports (RJ45), and it supports IEEE 802.3x flow control on full duplex. Additionally, it supports VLAN and QoS, and features LED status indicators and back pressure flow control on half duplex. With easy set up SFP GBIC module technology, you can quickly and easily add new nodes to your network with this switch.

This device provides 8 SFP slots and 2 RJ-45 ports that supports 10/100/1000 Ethernet. This product is also “all-fiber” capable. The SFP slots are full duplex and accept multimode, singlemode, and single fiber SFP modules (sold separately). The RJ-45 ports support auto-negotiation and auto MDI/MDI-X functions as well as full/half duplex modes. As with all VERSITRON products, the SG10208 10 Port Fiber SFP switch carries a lifetime warranty.

Technical Specifications:


IEEE 802.3, 802.3ab, 802.3i, 802.3u, 802.3x, 802.3z

MAC Address Table


Frame Buffer Memory


Switching Capacity



Copper Port:  RJ-45
Fiber Ports:   SFP Modules with LC Connectors


Copper Port: Cat5 or Higher
Fiber Ports:   Multimode: 50/125 or 62.5/125
                        Singlemode: 8/125 or 9/125

Flow Control

Full Duplex:    802.3x Flow Control
Half Duplex:   Back Pressure Flow Control

LED Indicators

Copper Port:   Link/Activity, Speed

Power Requirements

Power Supply Input:   100-240VAC, 50 ~ 60Hz
Power Supply Output:   15VDC, 2A


Operating Temperature:  0°C ~ +55°C
Storage Temperature:  -20°C ~ +70°C
Humidity:  5% ~ 90% non-condensing


7.48 x 4.10 x 1.14 inches (L x W x H)
190 x 104 x 29 mm (L x W x H)

10-Port Unmanaged Switch | 2-RJ45 Ethernet Ports, 8-SFP Fiber Ports (SG10208) Review:

George E.
4.0 out of 5 stars
July 3, 2023
The Perfect Solution for Your High-Speed Networking Needs

Managing a large network of devices for complete network coverage can be a massive undertaking. But with this 10 port unmanaged switch, it’s simple to get things up and running, and I appreciate that I can check on the status of each device with a glance at the LED lights. Not to mention that since installing this switch I have better data flow and more consistent performance across the network. No more worries about one device eating all the network bandwidth and leaving other connections high and dry!

  • 8 1000Mbps SFP Slots
  • 2 10/100/1000 Ethernet port (RJ45)
  • Supports IEEE 802.3x flow control on full duplex
  • Supports VLAN and QoS
  • LED Status Indicators
  • Back pressure flow control on half duplex Easy set up SFP GBIC Module Technology(See DataSheet Below)