7-Port Managed Industrial Switch | 6-RJ45 Ethernet Ports, 1-SFP Fiber Port

SF70760M

  • Free ground shipping for online store orders
  • Life Time Warranty
  • Free Unlimited Support

The VERSITRON SF70760M is an Industrial Gigabit Managed Switch equipped with six 10/100/1000Mbps RJ45 ports and one 100/1000M SFP fiber uplink ports that provide stable and reliable Ethernet transmission.

For fast and efficient connectivity from the network edge device to a backbone switch or server, the managed Gigabit switch is designed to extend existing LANs through two 100/1000Base-SX/LX interfaces using either one or two multimode or single mode fibers. The Industrial Managed Switches are fully managed Layer 2 switches not only incorporating the industry standard Rapid Spanning Tree Protocol (IEEE802.1w RSTP), but also a rapid ring recovery protocol enabling operational network recovery in the event of a network or power system failure.
7 Port Fiber and Ethernet Switches are also designed with a redundant power supply to further enhance network reliability and stability. Housed in rugged DIN rail or wall mountable enclosures, the switches are well suited for harsh environments such as industrial security, system automation applications and ITS.
 

Typical Applications

  • Any network utilizing a mix of copper and fiber
  • Industrial IP connectivity and communication
  • Self-healing Fast Ethernet backbone networks
  • Networks using Ethernet devices such as network cameras, access control, intercoms, etc
 
 

Product Features

  • 6-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
  • 1-Port 100/1000Base-SX/LX/EX/BX SFP Type Ports
  • Non-blocking store-and-forward switching
  • RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
  • Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
  • Available for operation in Ring or point-to-point configuration
  • Real-time monitoring via Embedded Surveillance Device Management System
  • Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
  • Distances up to 100 km with optional SFPs
  • Available for operation over single mode or multimode fiber over a variety of link budget
  • Available for operation over 1 or 2 fibers
  • No in-field optical adjustment required
  • Redundant dual power supply inputs 48/52 VDC
  • 4KV Ethernet Surge Protection for harsh environment
  • -40°C to 80°C (-40°F to 176°F) wide range operating temperature
  • Compact, corrosion resistant case attaches to a standard DIN Rails
 

Technical Specifications

Copper Ports (RJ45) 6-10/100/1000Base-T
SFP Uplink Ports 1-100/1000Base-SX/LX/EX/BX SFP
Port Configuration Auto MDI/MDI-X
Port Speed Auto-negotiate
Switch Architecture Store-and-forward
Switch Bandwidth 17Gbps (non-blocking)
MAC Address 8K Entries
Maximum Frame Size 9.6K Bytes (Jumbo Frames)
Flow Control Back pressure (Half-Duplex)
IEEE 802.3x Pause Frame (Full-Duplex)
Fiber Data Rate 1000Base-SX/LX/EX/BX
Fiber Connector SFP (Mini-GBIC) port
Fiber Type/Distance Varies by SFP Module
Power Pin Assignment ½ (+), 3/6(-) default
LED Indicators Power: On/Green
Ethernet: 10/100 LNK/ACT – Amber
                1000 LNK/ACT – Green
SFP Port: On/Blink – Green
Management Interface Console CLI, telnet, Web browser, SSH/SSL secure access
SNMPv1 and v2c and v3c
Port Configuration Enable/disable; Auto-negotiation;
10/100/1000Mbps full-and-half duplex mode selection; Flow control
Port Mirroring TX/RX Both; Many to 1 monitoring
Bandwidth Control Ingress/Egress rate control:
Configure (100~1000000Kbps)
Full Speed 1000000Kbps
VLAN IEEE 802.1q tagged-based VLAN
Up to 256 VLANs groups, out of 4094 VLAN IDs
Port-Based VLAN, Q-in-Q tunneling
Mac-based VLAN, up to 256 VLANs
Protocol-based VLAN, up to 128 VLANs
MVR (Multiple VLAN Registration)
Link Aggregation IEEE 802.3ad LACP / Static Trunk;
Up to 5 groups of trunk supported
QoS 8 priority queue
Traffic classification based on:
IEEE802.1p Based Cos,
IP DSCP Based Cos,
Multicasting/IGMP IGMP/MLD Snooping (v1,v2,v3)
With Query supported
Access Control List IP-Based ACL/MAC-Based ACL,
256 entries
SNMP MIBs RFC-1213 MIB-II
RFC-2819 RMON MIB (Group 1,2,3,9)
DC Power Input Voltage DC 9~52V, auto-sensing
Full Load Power
Consumption		 9 Watts
Dimensions 156 x 114.8 x 60mm
Case IP44 Metal Case
Housing DIN Rail Mounting
MTBF >100,000 hours
Operating Temperature -40°C ~ +80°C
Storage Temperature -40°C ~ +80°C
Relative Humidity 0% ~ 95% (non-condensing)