4-Port Managed Industrial PoE+ Switch | 2-RJ45 Ethernet Ports, 2-SFP Fiber Ports


The SF70460MP is a 4-Port 10/100/1000 Industrial Managed Switch equipped with two 10/100/1000Mbps PoE/PoE+ PSE Ports and two 100/1G SFP Slots that provide stable and reliable Ethernet transmission.

Product Features

  • 2-10/100/1000Mbps RJ-45 ports and 2-100/1000Mbps SFP Slots
  • Copper ports with auto-negotiation and auto-MDI/MD1-X detection
  • Supports 802.3x flow control for full duplex operation
  • Supports Link Fault Pass Through (LFPT)
  • Supports Redundant Ring function in switch mode
  • Supports back-pressure flow control for half-duplex operation
  • Supports Gigabit full wire speed bridging & forwarding performance
  • Supports jumbo frames up to 9600 bytes
  • Supports alarm feature for power failure and port link down
  • Supports green Ethernet power saving
  • Supports 802.3az Energy Efficient Ethernet
  • Supports stand-alone, DIN Rail, or Panel Mounting

Technical Specifications

IEEE Standards 802.3, 802.3ab, 802.3z, 802.3x, 802.3at, 802.1x 801.1w, 802.1D, 802.1Q
Network Ports 2-10/100/1000Mbps Copper Ports (RJ-45)
2-100/1000Mbps Fiber SFP Slots
Copper Ports Shielded RJ-45, 10/100/1000Mbps, auto-negotiation, auto-MDI/MDI-X
SFP Slot 100/1000Base compliant for standard SFP transceiver
Network Cables Copper Port: Cat5 or higher up to 100 meters
SFP Slot: 50/125, 62.5/125 MM Fiber, 9/125 SM Fiber
Power over Ethernet IEEE 802.3at compliant
Power delivery 30W max. per port up to 100 meters
MAC Addresses Table with 8K entries
Relay Output Alarm: Power Failure, Port Link Down
Interface: (3) Terminal Contacts (30VDC/1A max. or 120VAC/0.5A max.)
DC Power Input Screw Terminal Block: DC +/- contacts
Operating Voltage Range: +12 ~ +57VDC
PoE Voltage Range: +45 ~ +57VDC
Power Consumption 6W @ 56V max. (Full load without PoE support)
66W @ 56V max. (Full load with 2 PoE+ PSE max. output)
Web Management HTTP/HTTPS/SSH 2.0/CLI telnet/SNMP v1/v2c/v3/RMON
System Settings, Port Status/Statistics, Port Control, VLAN, QoS, Security, Spanning Tree, IGMP, DHCP, Firmware Upgrade 802.1x, 802.1w, Configuration Backup and Restore
LED Indicators Per Unit:            Power, Management Status
Per Port:            Speed/Link/Activity Status
Per SFP Slot:     Speed/Link/Activity Status
Per PoE Port:     Power Status
Dimensions 1.65 x 4.17 x 5.51 inches (W x D x H)
42 x 106 x 140 mm (W x D x H)
Mounting Stand-alone, DIN Rail, or Panel Mounting
Environment Operating Temperature:   -40°C ~ +70°C
Storage Temperature:       -40°C ~ +85°C
Relative Humidity:           5% to 95% non-condensing
Approvals FCC Part 15 Class A, VCCI Class A, CE Mark Class A, EN60950-1 Safety, EN61000-6-4 emission, EN61000-3-2, EN61000-3-3, EN61000-6-2 Immunity for industrial environments, IEC60068-2-64 Vibration, IEC60068-2-27 Shock

4 Port Industrial POE Switch(SF70460MP) Review:

Mike S.
4.0 out of 5 stars
December 2, 2021
Industrial-grade POE switch, simple to set up
So glad I went ahead and got a switch! Easy to use, works great, very stable connection without slowing anything down. I’ve got all 4 ports connected and so far no problems. This switch is probably a little more powerful than what I actually need, but it’s doing a great job and that just means it will last longer! This might be designed for industrial use, but it’s simple enough to set up at home, and reliable enough to use for your business.

  • 2 10/100/1000Mbps Ethernet Ports (RJ45) with 30W POE+ Power
  • 2 100M/1G SFP Slots
  • Copper ports support auto-negotiation, auto-MDI/MDI-X detection
  • Supports IEEE 802.3 flow control for full duplex and backpressure for half-duplex
  • LED status indicators for: power, management, speed, PoE, link/activity status
  • Supports IEEE 802.3az Energy Efficient Ethernet Supports standalone, DIN Rail or Panel Mounting