The PKR4S-RM kit provides a turnkey solution for extending four Plain Old Telephone Service (POTS) analog phone line over Singlemode fiber. This is a ring down application and utilizes two FXS devices at each end of the link.
Power Requirements |
12VDC, 1.0Amp |
Connector (Tip & Ring) |
RJ-11, 2-Wire Twisted Pair |
Installation |
Rackmount (2-slot 19” chassis) |
Fiber Interface Connector |
LC |
Fiber Cable |
Singlemode: 62.5/125 (Duplex) |
Link Margin |
Singlemode: 19dBm |
Audio Signal |
Analog, 300Hz to 3.4KHz |
Idle Channel Noise |
-65dBm |
Single Frequency Distortion |
-46dBm |
2nd Harmonic Distortion |
-55dBm |
Talk Battery |
44 to 52VDC |
Loop Current |
40mA max. (off hook) |
Ring Signal |
92V peak (max), 15 to 67Hz |
Line Impedance |
600Ω |
Operating Temperature |
0° to 50°C (32° to 122°F) |
Storage Temperature |
-40° to 70°C (-40° to 158°F) |
Humidity |
Up to 95% relative humidity (non-condensing) |
Altitude |
Up to 10,000 ft |
As a complete package, you get everything you need in a plug & play solution for your phone-to-fiber requirements and you receive a Lifetime Warranty from a trusted manufacturer since 1958! Contact us for assistance by calling (1-800-537-2296) or opening a chat. We are here to help!