1-Channel POTS to Fiber Rackmount Installation Kit | Data, ST, SM

PK1DS-RM

The PK1DS-RM installation kit is a rack-mountable solution and includes 1-channel FXO and FXS devices for extending a 2-wire analog (POTS) telephone line over fiber. Power supplies and 100 meters of Singlemode fiber cable are also provided. Supports RS-485/RS-422 full duplex data up to 64Kbps.  

2 Wire FXO/FXS to Fiber Converter Installation Kit

The PK1DS-RM kit provides a turnkey solution for extending a Plain Old Telephone Service (POTS) analog phone line over Singlemode fiber. The FXO unit is installed at the PBX (exchange) side of the link and the FXS unit is installed at the telephone (subscriber) side of the link. These Fiber Optic Teledata Modems are also used to extend RS-485 or RS-422 data up to 64Kbps.  


Technical Specifications of 2 Wire FXO/FXS to Fiber Converter Installation Kit:

Power Requirements

12VDC, 1.0Amp

Connector (Tip & Ring)

RJ-11, 2-Wire Twisted Pair

Data Connector

RJ-45

Fiber Interface Connector

LC

Installation

Rackmount (2-slot 19” chassis)

Fiber Cable

Singlemode: 9/125 (Duplex)

Link Margin

Singlemode: 19dBm

Audio Signal

Analog, 300Hz to 3.4KHz

Idle Channel Noise

-65dBm

Single Frequency Distortion

-46dBm

2nd Harmonic Distortion

-55dBm

Talk Battery

44 to 52VDC

Loop Current

40mA max. (off hook)

Ring Signal

92V peak (max), 15 to 67Hz

Line Impedance

600Ω

Operating Temperature

0° to 50°C (32° to 122°F)

Storage Temperature

-40° to 70°C (-40° to 158°F)

Humidity

Up to 95% relative humidity (non-condensing)

Altitude

Up to 10,000 ft


Each 2 Wire FXO/FXS to Fiber Converter Installation Kit Includes:

  • FXO Unit
  • FXS Unit
  • External Power Supplies (90-240VAC)
  • 100 Meters (328 ft) of Singlemode Cable - Duplex

As a complete package, you get everything you need in a plug & play solution for your phone-to-fiber requirements and you receive a Lifetime Warranty from a trusted manufacturer since 1958! Contact us for assistance by calling (1-800-537-2296) or opening a chat. We are here to help!


Additional Installation Kits Are Available For:


Key Features 2 Wire FXO/FXS to Fiber Converter Installation Kit

  • RJ11
  • 600 Ohms Impedance
  • LED Indicators
  • SFP Module Technology
  • 300Hz to 3.4KHz
  • Rackmount Options Manuals for 2-Wire Products
    (See Bottom of Page)