Description Technical Specification Key Features Resources & Downloads
VERSITRON’s 10-port managed industrial switch model SF71060MA is a ruggedized switch designed for challenging industrial environments. It is a standard layer 2 switch with eight 10/100/1000Base-T Gigabit Ethernet RJ-45 ports to connect nearby Fast Ethernet and Gigabit networking devices and two 100/1000Base-SX/LX SFP type ports for high-bandwidth, long-distance connections.
This 10 Gigabit managed switch has non-blocking, store-and-forward switching architecture, back pressure, and IEEE 802.3x PAUSE Frame Flow Control mechanisms that work in combination to assure efficient data transfer wit hout packet loss. The RJ45 ports have an auto-negotiation feature that helps automatically detect the type of connection, such as half or full duplex and speeds such as 10/100/1000 Mbps. Adding to this, the auto MDI/MDIX supports seamless integration on networking devices. Auto MDI/MDIX can easily adjust their signals to match the connected device, eliminating the need for new cables.
VERSITRON’s 10-port managed industrial switch can be configured in ring or point-to-point setups, ensuring network redundancy. The Embedded Surveillance Device Management System enables real-time monitoring of the switch's health. It allows users to troubleshoot proactively, thereby assuring optimal network performance.
The SFP ports enable flexible network configurations using SFP transceivers offered by VERSITRON. These transceivers allow users to optimize the value of their fiber investments in environments where electromagnetic interference is a key concern, such as industrial units. The switch is adaptable to different network demands. It supports interchangeable SFPs for different fiber types, distances, and connectors, enabling customization depending on the application requirements. This switch assures versatility in deployment as you can connect it over single or multimode fiber cables for up to 100 km.
This 10-port industrial Ethernet switch is designed to withstand operational challenges such as vibrations, surges, ambient temperatures, and shocks in industrial environments. It features redundant dual power supply inputs, 4KV Ethernet surge protection, and assures superior reliability across a wide operating temperature range from -40°C to 80°C. The switch is offered with a compact, corrosion-resistant case with a DIN rail attachment that enhances its suitability for industrial environments.
Typical Applications
Industrial Automation
Surveillance systems
Access control systems
Communication networks
Copper Ports (RJ45) 8-10/100/1000Base-T
SFP Uplink Ports 2-100/1000Base-SX/LX/EX/BX SFP
Port Configuration Auto MDI/MDI-X
Port Speed Auto-negotiate
Switch Architecture Store-and-forward
Switch Bandwidth 26Gbps (non-blocking)
MAC Address 8K Entries
Maximum Frame Size 9.6K Bytes (Jumbo Frames)
Flow Control Back pressure (Half-Duplex)
Fiber Data Rate 1000Base-SX/LX/EX/BX
Fiber Connector SFP (Mini-GBIC) port
Fiber Type/Distance Varies by SFP Module
Power Pin Assignment ½ (+), 3/6(-) default
LED Indicators Power: On/Green
Management Interface Console CLI, telnet, Web browser, SSH/SSL secure access
Port Configuration Enable/disable; Auto-negotiation;
Port Mirroring TX/RX Both; Many to 1 monitoring
Bandwidth Control Ingress/Egress rate control:
VLAN IEEE 802.1q tagged-based VLAN
Link Aggregation IEEE 802.3ad LACP / Static Trunk;
QoS 8 priority queue
Multicasting/IGMP IGMP/MLD Snooping (v1,v2,v3)
Access Control List IP-Based ACL/MAC-Based ACL,
SNMP MIBs RFC-1213 MIB-II
Power Input Voltage 100-240VAC, 50/60Hz
Full Load Power Consumption
9 Watts
Dimensions 156 x 114.8 x 60mm
Case IP44 Metal Case
Housing DIN Rail Mounting
MTBF >100,000 hours
Operating Temperature -40°C ~ +80°C
Storage Temperature -40°C ~ +80°C
Relative Humidity 0% ~ 95% (non-condensing)
8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
2-Port 100/1000Base-SX/LX/EX/BX SFP Type Ports
Non-blocking store-and-forward switching
RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
Available for operation in Ring or point-to-point configuration
Real-time monitoring via Embedded Surveillance Device Management System
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
Distances up to 100 km with optional SFPs
Available for operation over single mode or multimode fiber over a variety of link budget
Available for operation over 1 or 2 fibers
No in-field optical adjustment required
Redundant dual power supply inputs 48/52 VDC
4KV Ethernet Surge Protection for harsh environment
-40°C to 80°C (-40°F to 176°F) wide range operating temperature
Compact, corrosion resistant case attaches to a standard DIN Rails
