| Reference Input Signal: |
Sinusoidal or square wave NRZ with a 1 Volt RMS minimum amplitude. |
| Reference Input Frequency: |
1.0, 1.544, or 5.0 MHz, depending on reference module used. |
| Reference Input Impedance: |
50, 100 or 600 , depending on reference module used. |
| Output Frequencies: |
See Table for standard and optional frequencies available. |
| Output Stability: |
Dependant on the external or internal references; the CDS-20 may be configured to operate with up to 3 separate external references, using a cesium beam, Loran, GPS, or WWW source, for a stability of one part in 10 to the 12th. |
| Output Interface: |
Conforms to the requirements of MIL-STD-188-114, balanced or unbalanced, EIA-RS-422, RS-423, and RS-232C. Balanced outputs recommended for frequencies above 1 MHz, |
| Mechanical: |
|
- Power Rqmts:
|
115 or 230 VAC, ±10%, 48-62 Hz |
|
0º to ±40ºC (32º to +104ºF) |
|
Up to 95% (non-condensing) |
|
Up to 10,000 feet |
|
7.0" high (17.8 cm) x 17.3" wide (43.8 cm) x 18.5" deep (47.0 cm) |
|
Approx. 57 lbs. (25.7 kg) fully laden; chassis 34 lbs (15.4 kg) empty |
