Description
Technical Specification
Key
Features
Resources
& Downloads
FDVTR1AA3A-AE: 1-Channel Digital Fiber Optic Video Converter Installation Kit
VERSITRON’S VersiVision Product Series
Everything you need in a complete package for connecting your analog camera to your monitoring equipment. The FDVTR1AA3A-AE supports 8-bit digitally encoded broadcast quality video over one multimode optical fiber. Not only do these devices support NTSC, PAL, and SECAM camera systems, they provide additional signaling capability for bi-directional data, audio, and contact closure as well as 10/100 Ethernet.
*All VersiVision Installation Kits include: Transmitter, Receiver, Power Supplies & 100 Meters of Fiber.
ST optical connectors are standard for both standalone and rackmount versions. For applications requiring several receiver units at your monitoring site, we offer an 18-Slot rackmount chassis that fits a standard 19" rack.
Technical Specifications of FDVTR1AA3A-AE: 1-Channel Digital Fiber Optic Video Converter
Video Input
2 Volt pk-pk (75 Ohms)
Input/Output Channels
1
Bandwidth
5 Hz – 8 MHz
Bit Resolution
8 – Bit
Differential Gain
< ±1%
Differential Phase
< ±1°
Tilt
< 1%
S/N Ratio
60dB (Weighted)
Wavelength - MM
850/1310nm
Number of Fibers
1
Audio Channels
One Bi-directional
Audio Impedance
600 Ohms
Input/Output Voltage
2.0Vp-p
Frequency Response
10Hz – 20KHz
Bit Resolution
24-bit
S/N Ratio
>95db (Weighted)
Video Connector
BNC
Optical Connector
ST
Power Supply
5VDC, 2A
Data Interface
RS-485 (RS-422, RS-232 Optional)
Data Rate
Up to 300 Kbps
Data Channels
One Bi-Directional
Bit Error Rate
10⁻⁹
Data/Audio/CC Connector
Screw Terminal Strip
Ethernet Data Rate
10/100 Mbps
Ethernet Connector
Shielded RJ-45
MTBF
>100,000 Hours
Operating Temperature
-35°C to +65°C
Storage Temperature
-45°C to +85°C
Relative Humidity
0% to 95% (non-condensing)
Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. LED indicators are provided to instantly monitor the system operating status. A typical installation utilizes a transmitter unit at the camera end of the link, connected via a single fiber optic cable, to a receiver unit at the monitoring end of the link.
These products are currently in use in some states for monitoring traffic. All the advantages of fiber apply – protection from lightning strikes, greater distances supported for less cost, immunity to EMI & RFI, increased bandwidth to handle more data, voice and video transmission.
As with all VERSITRON products, these video converters carry a lifetime warranty. Please give us a call (1-800-537-2296) or open a chat with any questions. We would be delighted to speak with you!
Key Features of FDVTR1AA3A-AE: 1-Channel Digital Fiber Optic Video Converter
8-Bit Uncompressed Video Transmission
24-Bit Digitally Encoded Audio
10/100 Ethernet
NTSC, PAL, or SECAM Camera System Compatible
RS-485 Data Protocol
RS-232, RS-422 upon request Transmit up to 30km without Optical Attenuation WDM Technology for Higher Reliability No EMI, RFI, Cross Talk, or Video Distortion No Electrical or Optical Adjustments Required LED Indicators for Instant System Monitoring Standalone or Rackmount in FVC18 Chassis VersiVision Chassis
