16-Port 10/100
Fiber Optic Switch
With Management
Model S71650

This product is currently unavailable. For alternative solutions, please check out the following:

Subscribing to the "less is more" theory, you can streamline your network
needs by choosing the S71650 16 port 10/100 switch.

This switch will work with either 10Base or 100Base networks thus eliminating the need for duplicate hardware. No need for cross-over cables on the TP ports either.

Furthermore, this switch is absolutely compatible with other ethernet equipment making it easy to integrate into your present network.

 


In addition, fiber optic capability is built in. You can add a fiber uplink to this switch and get all the benefits that fiber has to offer including increased distances and bandwidths, more secure transmission, and immunity to EMI/RFI. You may also choose multimode or singlemode fiber.

Also, traffic jams are eliminated through the Broadcast Storm Protection feature, and data traffic can be prioritized to optimize network performance. You can't miss with the S71650. As with all VERSITRON products, this switch carries a lifetime warranty.

Please call 1-800-537-2296 or open a chat with questions or comments. We look forward to speaking with you.

KEY FEATURES

  • Provides 15 10/100Mbps switched ports and
    1 100Base-FX switched port shared with TP port 16
  • Complies with IEEE 802.3 10Base-T,
    802.3u 100Base-TX and 100Base-FX standards
  • Each TP port supports both 10/100Mbps auto-negotiation
    and auto-MDI/MDI-X connection
  • Supports duplex operation for each port
  • 2K MAC addresses and automatic MAC address learning and aging
  • Store-and-forward architecture
  • Broadcast storm protection
  • Supports full-duplex flow control (IEEE 802.3x)
  • Supports VLAN function, 15 groups of VLAN switch selectable
  • Supports QoS function, the tag in an Ethernet packet contains VLAN
    and priority information of packets. Per port provides 4 transmit queues.
  • Supports Ethernet frame up to 1522 bytes
  • 19" rack mountable

 

SPECIFICATIONS

Fiber Port: Multimode/Single Mode Duplex ST or SC connector
Fiber Media: Multimode: 1300nm 62.5/125µm fiber cable (2km max.)
Single Mode: 1300nm 9/125µm fiber cable (20km max.)
VLAN: 15 groups set by dip switch
Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX, 100Base-FX Fast Ethernet
Filtering Address: Unicast/Multicast/Broadcast address: 2K MAC addresses per unit
Filtering Rate: 14,880 pps for Ethernet, 148,800 pps for Fast Ethernet
Forwarding Rate: 14,880 pps for Ethernet, 148,800 pps for Fast Ethernet
Connector: Shielded RJ-45 jack
Cables: 10Base-T: Cat. 3, 4, or 5 UTP cable (100m max.) 100Base-TX: Cat. 5 UTP cable (100m max.)
LED Indicators: Power status, Link/Activity, Full Duplex/Collision status for each port
Environment: Operating Temperature: 0º C to 50º , Storage Temperature: -40º to 70º C
Relative Humidity: 5% to 95% non-condensing
Dimension: 16.9 x 4.1 x 1.7 inch (430 x 105 x 44 mm)
Power: 100-240 VAC, 50-60 Hz, 16W (max)

MODULES

Model
Mode
Connector
Distance
S70053
MM
ST
2Km
S70054
MM
SC
2Km
S70055
SM
SC
20Km

___Email this Page:

VERSITRON INC.
83 Albe Drive - Suite C - Newark, DE 19702
Need Help? Call 1-800-537-2296, or 302-894-0699 Fax. 302-894-0624
www.versitron.com
fiberlink@versitron.com