VersiVision
FVTM/FVRM200x-0E
2-Channel Fiber Optic Video Multiplexer
With 10/100 Ethernet Capability
Digitally Encoded
|
|
Have a remote location with both an analog and an IP camera? Need to extend your LAN network to the same location as two CCTV analog surveillance cameras? These VERSITRON VersiVision Series video/data multiplexers may be just what you are looking for. You can also depend on a quick and easy installation. The units support broadcast quality transmission of two channels of 8-bit digitally encoded video and 1 channel of 10/100 Ethernet over ONE multimode or singlemode optical fiber.
These muxes are directly compatible with NTSC, PAL, and SECAM camera systems. LED indicators are provided to instantly monitor the system operating status.
|
|
| Plug and Play design ensures adjustment-free installation and operation. Electronc and optical adjustments are never required. A typical installation utilizes a 2-channel transmitter unit at the camera end of the link, connected via a single fiber optic cable, to a 2-channel receiver unit at the monitoring end of the link. Devices are available for either standalone or rackmount installation with the FVC14 Chassis.
Please give us a call (1-800-537-2296) or open a chat with any questions. |
KEY FEATURES
- 8-Bit Uncompressed Video Transmission
- 10/100 Ethernet
- NTSC, PAL, or SECAM Camera System Compatible
- Transmit up to 30km without Optical Attenuation
- No EMI, RFI, Cross Talk, or Video Distortion
- Wide Optical Dynamic Range
- No Electrical or Optical Adjustments Required
- LED Indicators for Instant System Monitoring
- Standalone or Rackmount in FVC14 Chassis
|
| |
|
SPECIFICATIONS
| Video Input: |
1 volt pk-pk (75 ohms) |
| Input/Output Channels |
2 |
| Bandwidth: |
5 Hz - 8 MHz |
| Bit Resolution: |
8-bit |
| Differential Gain: |
< 2% |
| Differential Phase: |
< 0.6° |
| Tilt: |
< 1% |
| S/N Ratio: |
67dB (Weighed) |
| Sampling Rate: |
15.36 MHz |
| Wavelength: |
Multimode 850/1310nm
Singlemode 1310/1550nm |
| Optical Emitter: |
Laser Diode |
| Number of Fibers: |
1 |
| Ethernet: |
|
| Data Rate: |
10/100Mbps
|
Number of Channels
|
1 |
| Connectors: |
|
| Optical: |
ST
|
Video
|
BNC |
Ethernet
|
Shielded RJ-45 |
| Power Supply: |
12VDC |
| Dimensions: |
8.03 x 7.87 x 1.16 inches |
| MTBF: |
> 100,000 hours |
| Operating Temp: |
-35° C to + 75°C |
| Storage Temp: |
-50° C to +85°C |
| Relative Humidity: |
0% to 95% (non condensing) |
|
| Model |
Function |
Connector |
Fiber Cable |
Wavelength |
Max Distance |
| FVTM2003-0E |
Transmitter |
ST Simplex |
MM |
850/1310nm |
3 km |
| FVRM2003-0E |
Receiver |
ST Simplex |
MM |
850/1310nm |
3 km |
| FVTM2005-0E |
Transmitter |
ST Simplex |
SM |
1310/1550nm |
30 km |
| FVRM2005-0E |
Receiver |
ST Simplex |
SM |
1310/1550nm |
30 km |
Note: ST-SC adapters are available for applications using SC fiber connectors.
|
