VersiVision
FDVT/FDVR100x-0E
1-Channel Fiber Optic Video Converter
With 10/100 Ethernet Capability
Digitally Encoded
|
|
Have a remote location with both an analog and an IP camera? This product will support support both cameras over one fiber optic cable. Need to extend your LAN network to the same location as a CCTV analog surveillance camera? Not a problem with this video converter's 10/100 Ethernet capability.
These VERSITRON VersiVision Series video/data transmitters and receivers support broadcast quality transmission of 8-bit digitally encoded video and 10/100 Ethernet over one multimode or singlemode optical fiber. The units are directly compatible with NTSC, PAL, and SECAM camera systems. LED indicators are provided to instantly monitor the system operating status.
|
|
| Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. A typical installation utilizes a transmitter unit at the camera end of the link, connected via a single fiber optic cable, to a receiver unit at the monitoring end of the link. Devices are available for either standalone or rackmount installation with the FVC14 Chassis.
Please give us a call (1-800-537-2296) or open a chat with any questions. We would be delighted to speak with you. |
KEY FEATURES
- 8-Bit Uncompressed Video Transmission
- 10/100 Ethernet
- NTSC, PAL, or SECAM Camera System Compatible
- Transmit up to 30km without Optical Attenuation
- No EMI, RFI, Cross Talk, or Video Distortion
- Simultaneous Video and Data transmission
- Wide Optical Dynamic Range
- No Electrical or Optical Adjustments Required
- LED Indicators for Instant System Monitoring
- Standalone or Rackmount in FVC14 Chassis
|
| |
|
SPECIFICATIONS
| Video Input: |
1 volt pk-pk (75 ohms) |
| Input/Output Channels |
1 |
| Bandwidth: |
5 Hz - 8 MHz |
| Bit Resolution: |
8-bit |
| Differential Gain: |
< 2% |
| Differential Phase: |
< 0.6° |
| Tilt: |
< 1% |
| S/N Ratio: |
67dB (Weighed) |
| Sampling Rate: |
15.36MHz |
| Wavelength: |
Multimode 850/1310nm
Singlemode 1310/1550nm |
| Optical Emitter: |
Laser Diode |
| Number of Fibers: |
1 |
| Ethernet: |
|
| Data Rate: |
10/100Mbps
|
Number of Channels
|
1 |
| Connectors: |
|
| Optical: |
ST
|
Video
|
BNC |
Ethernet
|
Shielded RJ-45 |
| Power Supply: |
12VDC @ 1.5 A |
| Dimensions: |
4.57 x 5.31 x 1.42 inches |
| MTBF: |
> 100,000 hours |
| Operating Temp: |
-35° C to + 75°C |
| Storage Temp: |
-50° C to +85°C |
| Relative Humidity: |
0% to 95% (non condensing) |
|
| Model |
Function |
Connector |
Fiber Cable |
Wavelength |
Max Distance |
| FDVT1003-0E |
Transmitter |
ST Simplex |
MM |
850/1310nm |
3 km |
| FDVR1003-0E |
Receiver |
ST Simplex |
MM |
850/1310nm |
3 km |
| FDVT1005-0E |
Transmitter |
ST Simplex |
SM |
1310/1550nm |
30 km |
| FDVR1005-0E |
Receiver |
ST Simplex |
SM |
1310/1550nm |
30 km |
Note: ST-SC adapters are available for applications using SC fiber connectors.
|
