M7260M
10/100/1000Base-T to 1000Base-X
"Triple-Duty" Gigabit Ethernet
Media Converter With Management
 
 

Network Speed becomes a non-issue with the new 10/100/1000
"Triple-Duty" gigabit media converter.

Put in 10Base-T, 100Base-TX, or 1000Base-T copper signals and get 1000Base speeds on the fiber side. Once these signals are converted to fiber, the signal will travel 1000Mbps no matter what your copper signal speed is when using the "Triple-Duty".

You can use these converters as standalone units or they can be rackmounted in our MCC-16 Chassis.

The M7260M employs GBIC Module Technology and carries a lifetime warranty.

Please give us a call (1-800-537-2296) or open a chat with any questions.
We would be delighted to speak with you.
 

KEY FEATURES

  • Tri-Speed 10/100/10000Mbps Copper to 1000M Fiber Conversion
  • Supports full wire speed conversion
  • Supports auto-negotiation with link partners
  • Provides Loop Back Test Function
  • DIP Switches for Port Operating Mode, Flow Control, Status Monitoring
  • Provides Monitoring Function for Remote Link Partner's Copper Link Status
  • Optional Web-Based Management
  • Supports Tagged/Untagged Packet Filtering
  • Supports 802.1Q VLAN, 802.1p QoS, DSCO Priority Classifications
  • Supports Q-in-Q application with Double Tag Capability
  • Supports SNMP Trap for Port Link Change
  • Supports SFP GBIC Module Technology

SPECIFICATIONS

Standards: IEEE 802.3, 802.3u,
802.3ab 802.3z
Copper Port: Shielded RJ-45, 10/100/1000Mbps, Full/Half Duplex
Auto-negotiation capable, Auto-MDI/MDI-X
Fiber Port: LC (SFP Mini-GBIC) Connector
1000Mbps full duplex, Auto-negotiation, Far End Fault Support
Network Cables: Copper Port:   Cat.5e (or higher) recommended up to 100m
Fiber Port:    Multimode:  50/125µm, 62.5/125µm fiber cable
                       Singlemode:    9/125µm fiber cable
Dip Switches: Copper Port Operating Mode, Flow Control,
Auto Report for Remote Copper Link Status
LED Indicators: Port Status, Local/Remote Copper Port Status: Link/Speed/Duplex
Local Fiber Port Link Status, Loop Back Test Status
Far end fault Function
Standalone Installation: Desktop, Wall, Din-Rail (optional)
Rackmount Installation: Up to 16 units in one MCC-16 rackmount chassis with one central power source
Supports optional power redundancy and management
Environment:
Operating
Temperature:		 -5º ~ 55º C
Storage
Temperature:		 -20º ~ 85º C
Relative
Humidity:		 10% ~ 90% non-condensing
Dimension: 4.25 x 2.85 x 0.91 inch (108 x 72.5 x 23 mm)(L x W x H)
Power Consumption: 2 Watts (max.) @ 7.5VDC
Power Input: +5 ~+12VDC (+/- 5%)
Management: Web-Based Browser Interface
Port Control: Operating Mode, Flow Control
Packet Filtering: 802.1Q Tagged Packet Filtering, Untagged Packet Filtering
802.1Q VLAN: Ingress 802.1Q Tag Stripping, Egress 802.1Q tagging (Tag Insertion)
QoS: Four Priority Levels, 802.1p, DSCP-Based Priority Classifications
Service Policy - Strict Priority, WFQ (Weighted Fairness Queuing)
Monitoring: Local Port Status, Remote Port Status, Port Statistics
Maintenance: Restore Factory Default, Reboot, Firmware Update
SNMP Trap: Trap Events: Boot up, Login Failure, Copper Link Port Change, Fiber Port Link Change

 

Available SFP GBIC Modules (Ordered Separately)

Model Duplex Fiber Wavelength Connector Distance TX Power RX Sens
GBMM Multimode SX (62.5/125)
Multimode SX (50/125)		 850nm
850nm		 LC
LC		 220m
550m		 -9.5 ~
-4		 < -18
GB2MM Multimode LX
 1310nm
 LC 2km
 -9 ~ -4 < -19
GB10SM Multimode LX
Singlemode LX		 1310nm
1310nm		 LC 550m
10 Km		 -9.5 ~
-3		 <-20
GB20SM Singlemode LX 1310nm LC 20 Km -4 ~ +1 < -24
GB40SM Singlemode LX 1550nm LC 40 Km -4 ~ +1 < -24
GB70SM Singlemode LX 1550nm LC 70 Km 0 ~ +5 < -24
GB100SM Singlemode LX 1550nm LC 100 Km 0 ~ +5 < -30

Model Single Fiber Wavelength Connector Distance TX Power RX Sens
GB10SFA Singlemode LX Tx: 1310nm
Rx: 1550nm		 LC 10 Km -3 ~ -9 < -21
GB10SFB Singlemode LX Tx: 1550nm
Rx: 1310nm		 LC 10 Km -3 ~ -9 < -21
GB20SFA Singlemode LX Tx: 1310nm
Rx: 1550nm		 LC 20 Km -3 ~ -8 < -23
GB20SFB Singlemode LX Tx: 1550nm
Rx: 1310nm		 LC 20 Km -3 ~ -8 < -23
GB40SFA Singlemode LX Tx: 1310nm
Rx: 1550nm		 LC 40 Km -3 ~ +2 < -23
GB40SFB Singlemode LX Tx: 1550nm
Rx: 1310nm		 LC 40 Km -3 ~ +2 < -23
GB60SFA Singlemode LX Tx: 1310nm
Rx: 1550nm		 LC 60 Km 0 ~ +5 < -24
GB60SFB Singlemode LX Tx: 1550nm
Rx: 1310nm		 LC 60 Km -2 ~ +4 < -25
GB80SFA Singlemode LX Tx: 1310nm
Rx: 1550nm		 LC 80 Km -2 ~ +3 < -26
GB80SFB Singlemode LX Tx: 1550nm
Rx: 1310nm		 LC 80 Km -2 ~ +3 < -26
GB40SFCxx Singlemode LX Tx: xx =1xx0nm
Rx =1100-1650nm		 LC 40 Km -5 ~ 0 < -24
GB80SFCxx Singlemode LX Tx: xx =1xx0nm
Rx =1100-1650nm		 LC 80 Km -5 ~ 0 < -24

Note: Temperature Range for all GBIC Modules = 0 to 70°C

___Email this Page:

VERSITRON INC.
83 Albe Drive - Suite C - Newark, DE 19702
Need Help? Call 1-800-537-2296, or 302-894-0699 Fax. 302-894-0624
www.versitron.com
fiberlink@versitron.com